Shadow

Shadow , 7 days ago

Immich

Shadow , 8 days ago

I have a sliding door that I want to toss a stepper motor on, so my dog can push a button and let himself in / out.

Dog tax

Shadow , 13 days ago

I share my jellyfin with my mom

Shadow , 1 month ago

Replace one disk, let the raid rebuild. Do the same with the other disk. Do an mdadm grow, then maybe fdisk / lvm / resize fs depending on your setup. Don't forget to install a bootloader when you put a new disk in.

Making a new array and migrating data is for chumps.

Shadow , 1 month ago

Yes it's really that easy. Raid in Linux is usually at the partition level, not the whole device. The bootloader resides in the first few blocks of the disk before your partitions, and isn't included in the raid.

Use grub-install on the new disk device, ie /dev/sda

Shadow , 1 month ago

Self hosting email is even more of a pain.

Shadow , 1 month ago

A lot of reasonably competent geeks just never get deep into networking, and VPNs can be overwhelming. It doesn't really help that for a long time it was all IPSec which basically you need to learn voodoo to manage. Thankfully we have much better tools now, but it's still just a tech layer that many people don't touch frequently.

Shadow , 1 month ago

Did you enable the route in the admin web ui?

Shadow , 1 month ago

That should be all that's required. Are you using ACLs? If so you need to provide access to the subnet router as well as a rule to the IP behind it

Shadow , 1 month ago

Can your nodes ping each other on the tailscale ips? Check tailscale status and make sure the nodes see each other listed there.

Try tailscale ping 1.2.3.4 with the internal IP addresses and see what message it gives you.

tailscale debug netmap is useful to make sure your clients are seeing the routes that headscale pushes.

Shadow , 1 month ago

Relay "ams" means you're using tailscales DERP node in amsterdam, this is expected if you don't have direct connectivity through your firewall. Since you opened the ports that's unusual and worth looking into, but I'd worry about that after you get basic connectivity.

So to confirm your behavior, you can tailscale ping each other fine and tailscale ping to the internal network. You cannot however ping from the OS to the remote internal network?

Have you checked your routing tables to make sure the tailscale client added the route properly?

Also have you checked your firewall rules? If you're using ipfw or something, try just turning off iptables briefly and see if that lets you ping through.

Shadow , 1 month ago

How do I do this?

Run ip route show table all

I would expect to see a line like:

192.168.178.0/24 dev tailscale0 table 52

Out of curiosity on a remote node do tcpdump -i tailscale0 -n icmp and then do a ping from the other side, does tcpdump see the icmp packets come in?

Shadow , 1 month ago

The tailscale client should have created an interface, but I've never used it on a box also running wg. You don't have a tailscale specific interface in ip addr show at all? That's.... odd.

Do you have a device at /dev/net/tun?

Shadow , 1 month ago

Not home lab specific, but a few things around my house to help inspire you.

Cable fingers

https://lemmy.ca/pictrs/image/32e92478-d097-444f-a6cd-a9f8b1963466.jpeg

Nuc wall mount

https://lemmy.ca/pictrs/image/626e75d6-9ca0-4c0b-bd7d-a1e8fa2b0b79.jpeg

Tool peg board mounts

https://lemmy.ca/pictrs/image/7d1911df-82d4-4415-9281-548892d1ff76.jpeg

Heavy ass speaker onto a vesa pole mount to get them above my monitors

https://lemmy.ca/pictrs/image/cd66d163-eb4e-4869-a6f9-da825acd212e.jpeg

Couch gaming gear

https://lemmy.ca/pictrs/image/7b7923e9-a1df-4b90-8008-a30e4c4a63ec.jpeg

Sonos wall mount

https://lemmy.ca/pictrs/image/8fbcedaa-c489-442e-896d-f0d001fd57e2.jpeg

Shadow , 1 month ago

https://www.metageek.com/training/resources/zigbee-wifi-coexistence/

Maybe? Tweaking my channels solved all my random drops.

Shadow , 2 months ago

More aimed towards network operators than self hosters, but https://ring.nlnog.net/

Shadow , 2 months ago

Wow, that's insane.

Shadow , 2 months ago

This doesn't work on the latest firmware FYI.

I use this to run an instance of Hyperion on the tv to run leds on the back of it, that dynamically change color to match the show. Since it's native on the tv it works in jellyfin or my pc hdmi cable.

For me running jellyfin in the tv works so well, it's worth giving it network access.

Shadow , 2 months ago

Right to be forgotten applies to personal data. Your posts are not personal data.

Shadow , 2 months ago

Please provide evidence that a public post you make would be considered personal info.

https://law.stackexchange.com/questions/28276/are-internet-forum-posts-considered-personal-data-under-gdpr

The law is poorly written unfortunately and I don't think we'll know for sure until there's a legal challenge.

Shadow , 2 months ago

Ah Gotcha, but I don't think you're right.

Right to be forgotten: https://gdpr-info.eu/art-17-gdpr/

This talks explicitly about personal data in all contexts.

The definition of personal data is anything that can be used to identify someone: https://gdpr-info.eu/issues/personal-data/

This isn't all user data, just stuff that makes a user identifiable.

Shadow , 2 months ago

https://www.hortusfox.com/

Shadow , 2 months ago

Lots of cheese. Op is probably vegetarian

Shadow , 2 months ago

Doh. I completely missed that.

Shadow , 2 months ago (edited 2 months ago)

Can just point it to /dev/shm as a transcoding folder, for a quick and dirty way.

Otherwise you'd mount a tmpfs disk.

Shadow , 2 months ago

But op used the word camera 3 times and the word phone 0 times...

Shadow , 2 months ago

I can tell you that for lemmy.ca we use 778gb

Shadow , 2 months ago

If it's just a private instance, your storage needs will be way less. We use object storage, so it's actually pretty cheap (like $5-10 a month iirc). We're not storing that all on the server disk.

Shadow , 2 months ago

Images come from their origin, but I think thumbnails are cached on your instance.

Shadow , 2 months ago (edited 2 months ago)

Wax paper, or just paper, or tin foil.

Like Cadbury creme eggs used to just be wrapped in foil, now they're plastic. <- Apparently this is only in Canada since 2015. TIL.

Shadow , 2 months ago

TIL it's only Canada that switched

https://en.wikipedia.org/wiki/Cadbury_Creme_Egg

As of 2015, the packaging in Canada has been changed to a 34 g (1.2 oz), purple, red and yellow soft plastic shell.

Shadow , 2 months ago

Apparently it's a Canada only thing, started in 2015.

Shadow , 3 months ago

Before everyone gets their pitchforks out - Person from the image posted on Hacker News, CEO replied and said this charge shouldn't have happened and they wouldn't be charging the client anything.

https://news.ycombinator.com/item?id=39520776

Shadow , 3 months ago

Yeah but then you have a customer calling and screaming at you "We just launched our big sale of the year and our site has been down for an hour!!!!".

If you let them burst and bill them, you end up with angry clients. If you don't, you end up with angry clients. Letting them burst and being forgiving with the bill is the better approach IMHO.

Shadow , 3 months ago

Talk to an existing union? My understanding is most unions don't start from scratch, it's too much work.

Shadow , 3 months ago

As an additional data point, I've never once had trouble seeing the HUD on my Mazda even while driving into the sun.

Shadow , 3 months ago

FYI, Canada requires immobilizer by law. We can't be used to compare to other countries for that reason.

https://www.ctvnews.ca/autos/kia-and-hyundai-vehicles-in-canada-not-affected-by-u-s-theft-issue-automakers-say-1.6252590

Shadow , 3 months ago

Why do you need an app to guide you through cooking?

Why would you buy a kitchen appliance that requires an app in the first place? Optional, sure. Required? Fuck no.

Your concerns of software support are valid. Typically the companies lose interest within 5 years in my experience.

Also I have no idea what appliance this is in the picture. Is this a stand mixer? Combined with a scale? And an induction cooker? Just buy one of each and save a pile of money and hassle. Integrated devices never do anything well.

I guarantee this hardware will fail within 10 years. Your 30 hand me down probably has no digital circuits in it, it's all mechanical and easily repaired.

Shadow , 3 months ago

Software just changes too much IMHO. That thing isn't going to support the latest wifi security setting you want to turn on in 5 years. For long term appliances, I would avoid anything that requires use of an app or loses functionality without one.

Shadow , 3 months ago

Maybe if slack didn't have an SSO tax, it wouldn't be an issue.

Shadow , 3 months ago

Tell me about it. Github goes from $4 to $21 per user per month, and the only feature I want is sso.

Shadow , 3 months ago

If it hung like that, you probably have some sort of storage issue or high memory consumption pushing the box into swap.

Intel amt may help you, if you want hardware then google pikvm. Raritan also makes a small single node ip kvm, but it'll probably cost more.

Shadow , 3 months ago

More discussion here: https://avherald.com/h?article=51530e9d&opt=0

Shadow , 3 months ago

I think so, the depth of field doesn't really make sense.

Shadow , 3 months ago

Really kind of them to let their investors know first, rather than the people impacted. I bet morale there is wonderful.

Shadow , 3 months ago

You may need a "hdmi dummy plug"

Shadow , 3 months ago

It's perfectly effective, they become fully isolated from each other. Yes vlans would work if they're all on the same host. If they're not on the same host you would need a vlan capable switch, or at least one that'll pass tagged packets through.

Shadow , 3 months ago

Because MS designed Lenovo motherboard for them and told them where to put the tpm debug pins? I think you're casting blame at the wrong vendor here.

Doesn't matter how good the software is if the hardware vendor fucks up like that.